Safety Films
Important
New
Australian Standards AS1288 covers all installations of glass at heights and
distances from activities that might be prone to accidents and/or increased
activity or proximity to people (sliding doors, low windows or glass, glass
near playgrounds etc). Glass covered by this standard MUST be Grade A safety
glass (and in some situations Grade B Wired) in order to comply.
APPLICATIONS under AS1288
- Low Level Glass in Residential Buildings - Grade A
safety glass required where the lowest sightline is less than 500mm from
the floor.
- Schools, Early Childhood Centres, Aged Care
Buildings, Retirement Villages and Nursing Homes - Grade A safety glass
required within 1000mm of the floor in schools and within 1500mm
elsewhere.
- Areas Subject to High Risk Of Breakage - Gymnasiums,
Swimming and Spa Pools, Halls, Public Viewing Galleries, Stadiums etc
have a Grade A safety requirement.
- Doors and General Application - All doors and any
glazing within 2000mm of ground level of all buildings are considered
subject to risk of impact on human safety and have a Grade A safety
requirement.
The installation of safety film will allow normal annealed glass to
comply with the human impact safety standard (AS1288) and protect people
against glass injury.
Family Day Care
Tintplus has installed Safety Film in over 60 Family Day
Care homes and offers carers a FREE safety audit.
Security Films
Is your home safe from break-in?
You can’t rely on security screens. They do only half the job.
|